<?xml version="1.0" encoding="gb2312"?>
<rss version="2.0">
  <channel>
    <title>合金钢热处理</title>
    <link>http://www.chte.org/applications/hejingang/</link>
    <description>Latest 50 infos of 合金钢热处理</description>
    <copyright>Copyright(C) Empire CMS</copyright>
    <generator>Empire CMS by Empire Studio.</generator>
    <lastBuildDate>Sat, 02 May 2026 10:26:28 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.chte.org/e/data/images/rss.gif</url>
      <title>热处理技术网 — 热处理行业的超级智库 CHTE  最全的热处理技术信息网站 热处理技术网 CHTE</title>
      <link>http://www.chte.org/</link>
    </image>
    <item>
      <title><![CDATA[提高Cr12MoV钢模具寿命的热处理工艺]]></title>
      <description><![CDATA[ 提高Cr12MoV钢模具寿命的热处理工艺 ]]></description>
      <link>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3753</link>
      <guid>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3753</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 11 Jun 2016 06:05:19 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[金刚石锯片基体的热处理工艺探讨]]></title>
      <description><![CDATA[ 金刚石锯片基体的热处理工艺 ]]></description>
      <link>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3746</link>
      <guid>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3746</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 11 Jun 2016 05:06:33 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[硼对铁素体不锈钢耐蚀性能研究实验过程]]></title>
      <description><![CDATA[  2.1试验方案（流程图） 2.2真空冶炼及试验方法2.2.1冶炼工艺七种成分的不锈钢要求采用同样的冶炼工艺，即加 ]]></description>
      <link>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3642</link>
      <guid>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3642</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 09 Jun 2015 13:23:53 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[含硼锻造1Cr17不锈钢的点蚀行为研究]]></title>
      <description><![CDATA[ 一 论文题目：含硼锻造1Cr17不锈钢的点蚀行为研究二 课题来源及意义  1Cr17不锈钢是一种耐蚀性良好的通用钢 ]]></description>
      <link>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3641</link>
      <guid>http://www.chte.org/e/action/ShowInfo/?classid=49&amp;id=3641</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 09 Jun 2015 08:10:59 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[合金结构钢的热处理工艺性能列表]]></title>
      <description><![CDATA[  各种合金结构钢的热处理工艺性能列表由于文件表格比较大，请下载后查阅。 合金结构钢的热处理工艺性能列表 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2014-03-22/CHTE13954768413626.html</link>
      <guid>http://www.chte.org/applications/hejingang/2014-03-22/CHTE13954768413626.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 22 Mar 2014 08:23:56 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[钛合金热处理操作中需注意的事项]]></title>
      <description><![CDATA[ 淬火：1．  淬火操作时，从出炉到进入淬火介质之间的转移时间越短越好，以防&amp;amp;beta;相分解，转移时间最长不超 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2014-03-22/CHTE13954757603617.html</link>
      <guid>http://www.chte.org/applications/hejingang/2014-03-22/CHTE13954757603617.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Sat, 22 Mar 2014 08:06:39 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[刀具的刃材及热处理]]></title>
      <description><![CDATA[     420J2 ：(Cold Stell公司出品) 由于其低碳高铬的组成使这种钢材成为制作坚韧抗震刀刃的绝佳选择，同时还 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2014-02-25/CHTE13933195463577.html</link>
      <guid>http://www.chte.org/applications/hejingang/2014-02-25/CHTE13933195463577.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 25 Feb 2014 09:10:51 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[65Mn锯片不同淬火工艺性能的对比]]></title>
      <description><![CDATA[     65Mn钢具有较高的硬度，淬透性好，脱碳倾向少，切削性好等优点，但它有过热敏感性，易产生淬火裂纹，并有回火脆性，65Mn钢板、钢带用途广泛，主要用于制造各种板簧、弹簧片、刀具、制造圆锯片等。
 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2014-02-25/CHTE13933163863574.html</link>
      <guid>http://www.chte.org/applications/hejingang/2014-02-25/CHTE13933163863574.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 25 Feb 2014 08:10:05 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[40CrNiMoA  5CrMnMo  9CrSi工艺规范]]></title>
      <description><![CDATA[  ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-08-06/CHTE13757558273527.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-08-06/CHTE13757558273527.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 06 Aug 2013 02:20:42 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[34CrNi1Mo  34CrNi3Mo  12CrNi3A工艺规范]]></title>
      <description><![CDATA[  ① 12CrNi3A过冷温度为420～450℃。 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-08-06/CHTE13757556153526.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-08-06/CHTE13757556153526.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 06 Aug 2013 02:15:01 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[42CrMo钢的热处理]]></title>
      <description><![CDATA[ 请点击以下链接，查阅本技术文件： 42CrMo钢的热处理.pdf                                    d53fc3cc14b ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-07-23/CHTE13745568283502.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-07-23/CHTE13745568283502.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 23 Jul 2013 05:19:06 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[不锈钢的焊缝组织图]]></title>
      <description><![CDATA[ 不锈钢焊缝中的铁素体起着极其重要的作用，特别是奥氏体不锈钢和铁素体-奥氏体双相不锈钢的焊缝组织。奥氏体 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-17/CHTE13661804263241.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-17/CHTE13661804263241.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Wed, 17 Apr 2013 06:33:32 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[高速钢刀具硬度与热处理]]></title>
      <description><![CDATA[ 硬度是材料抵抗表面层局部塑性变形的能力。到目前为止，唯有硬度这个参数能直接反映材料表面层以及表面耐磨 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661132163224.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661132163224.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:49:01 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[不锈钢堆焊层铁素体测算方法的研究]]></title>
      <description><![CDATA[  请点击以下链接，查阅本文件： 不锈钢堆焊层铁素体测算方法的研究.pdf ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661128563221.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661128563221.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:47:15 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[不锈钢的固溶热处理]]></title>
      <description><![CDATA[ 固溶热处理：将奥氏体不锈钢加热到1100℃左右，使碳化物相全部或基本溶解，碳固溶于奥氏体中，然后快速冷却 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661125423215.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661125423215.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:41:57 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[7055铝合金的TTP曲线及其应用]]></title>
      <description><![CDATA[  请点击以下链接，查阅本文件： 7055铝合金的TTP曲线及其应用.pdf                                    e67 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661125143214.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661125143214.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:41:22 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[粉末冶金钢的烧结硬化]]></title>
      <description><![CDATA[  请点击以下链接，查阅本文件： 粉末冶金钢的烧结硬化.pdf                                    3ff456cce2 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661124793213.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661124793213.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:40:43 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[奥氏体不锈钢铸件热处理检验规程]]></title>
      <description><![CDATA[ 奥氏体不锈钢铸件热处理通常采用固熔处理和稳定化处理，使其具有最佳的抗腐蚀性。检验时着重监督供方是否按 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661124413212.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661124413212.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:40:18 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[不銹钢之热处理技术]]></title>
      <description><![CDATA[ 铬元素為此类材料具有不銹之因素，以往发现铬含量必须具有12%以上，才能形成密緻之表面氧化膜而达到防蚀保护 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661122963210.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661122963210.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:37:57 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[浇注和铸型温度对AZ91D合金性能的影响]]></title>
      <description><![CDATA[      镁合金是最轻的金属结构材料，其密度为1.75～1.90 g/cm3，其比强度高于铝合金和钢，略低于比强度最高的 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661122063208.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661122063208.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:36:22 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[形状记忆合金热处理]]></title>
      <description><![CDATA[ 到目前为止，发现具有形状记忆效应的合金有20余种，但得到实际应用四只百Ni-Ti和Cu-Zn-Al系合金。前者抗蚀性 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661120743205.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661120743205.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:34:03 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[冷作模具用高速工具钢的热处理]]></title>
      <description><![CDATA[ 高速工具钢是最优秀的刃具钢，由于它具有良好的力学性能以及承受高压力和高弯曲负荷的能力，常被用作冷作模 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661120403204.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661120403204.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:33:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[退火热处理对TA15钛合金组织性能的影响]]></title>
      <description><![CDATA[ TA15钛合金的名义成分为Ti-6.5Al-2Zr-1Mo-1V，其主要的强化机制是通过&amp;amp;alpha;稳定元素Al的固溶强化，属于高 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661117573200.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661117573200.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:28:54 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[某型号拖拉机发动机活塞的热处理]]></title>
      <description><![CDATA[ （1）发动机活塞的外形尺寸发动机活塞的外形尺寸如图10-15所示。     （2）材料及技术要求活塞是发动机实现 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661117313199.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661117313199.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:28:08 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[不锈钢和高速钢的渗氮处理]]></title>
      <description><![CDATA[  不锈钢的氮化方法：
    不锈钢氮化的是提高其硬度，提高其耐摩性和抗侵蚀能力。通常进行渗氮处理的有铁素 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661116573198.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661116573198.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:27:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[形变铝合金热处理操作注意事项]]></title>
      <description><![CDATA[ 淬火前的准备：1．淬火前要清除冷变形加工时附着在表面上的油垢及污物，常用汽油、丙酮、香蕉水等擦试，也可 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661115763196.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661115763196.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:25:40 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[含镍铸造钛铝合金的铸造热处理]]></title>
      <description><![CDATA[ 镍微合金化的铸造Ti-46.5Al-2.5V-1.0Cr（原子百分数，下同）合金进行了热处理工艺研究，并对镍微合金化简化 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661115373195.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661115373195.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:25:05 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[5Cr2NiMoVSi钢的热处理]]></title>
      <description><![CDATA[  5Cr2NiMoVSi钢是在5CrNiMo和4Cr5MoSiV(H11)钢的基础上研制的新钢种。强度高于5CrNiMo钢而稍低于4Cr5MoSiV( ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661111753194.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661111753194.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:11:10 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[记忆合金的热处理]]></title>
      <description><![CDATA[ 一．形状记忆合金热处理    到目前为止，发现具有形状记忆效应的合金有20余种，但得到实际应用四只百Ni-Ti和 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661101863187.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661101863187.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 11:02:44 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[铍及铍合金的基本性能及应用]]></title>
      <description><![CDATA[ 1. 铍及铍合金的基本性能金属铍（Be）是1797年在缘柱石中被发现的。它在地壳中含量不算太多，约为0.006%,是 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661099533182.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661099533182.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 10:58:46 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[镁合金热处理操作注意事项]]></title>
      <description><![CDATA[ 退火：1． 在循环空气电阻炉中加热，炉温均匀，温差不超过&amp;amp;plusmn;5&amp;amp;ordm;C，仪表示值准确2．  炉温高于150 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661086603165.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661086603165.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 10:37:07 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[钛合金热处理操作注意事项]]></title>
      <description><![CDATA[  淬火：1．  淬火操作时，从出炉到进入淬火介质之间的转移时间越短越好，以防&amp;amp;beta;相分解，转移时间最长不 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661086243164.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661086243164.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 10:36:21 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[关于平炉中钛合金的热处理]]></title>
      <description><![CDATA[ 常用的热处理方法有退火、固溶和时效处理。退火是为了消除内应力、提高塑性和组织稳定性，以获得较好的综合 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661085783163.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661085783163.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 10:35:58 +0000</pubDate>
    </item>
    <item>
      <title><![CDATA[铝及铝合金热处理与检验]]></title>
      <description><![CDATA[    一、铝及铝合金的分类与编号　　 1．分类 　　 铝及铝合金依据其成分和加工特点分为以下三类。　　 (1)工 ]]></description>
      <link>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661030133158.html</link>
      <guid>http://www.chte.org/applications/hejingang/2013-04-16/CHTE13661030133158.html</guid>
      <category>合金钢热处理</category>
      <author><![CDATA[]]></author>
      <pubDate>Tue, 16 Apr 2013 09:00:00 +0000</pubDate>
    </item>
  </channel>
</rss>